Published on June 18th, 2013 | by RepairClinic.com Staff0
Eight tips for getting your central air conditioning system ready for summer
Be sure that your air conditioner is turned off before completing any of these maintenance steps. Remember to allow the unit to dry entirely before powering on the unit again.
You can power off an air conditioner by turning your household thermostat to off and by turning off the circuit breaker or removing the household fuses for the air conditioner.
A central air conditioning system has two main components: an outdoor condensing unit and an evaporator unit installed in a furnace or air handler.
Watch our popular video about how a central air conditioner works:
1. Clean/replace the air filter in your furnace or air handler.
The air filter has the important job of ensuring air flow. A dirty air filter restricts air flow and causes the unit to unnecessarily work harder and waste energy. It may also eventually lead to unit failure.
2. Inspect the unit for nests.
Mice, birds, insects and other wildlife may have made a home inside of the unit, even if it was covered all winter. Tweet this tip.
Additionally, pet urine can be extremely damaging to a unit. Consider installing a small wooden garden fence around the perimeter of the unit, allowing for a two-foot clearance. This will deter pets from marking their territory there.
3. Clear debris from inside of the condensing unit.
It’s extremely important to keep condenser coils free from debris so that the heat can properly leave the unit.
From the inside of the condensing unit, use a garden hose with a steady stream to push out leaves, grass clippings, twigs, pollen and other debris that are stuck between the coils. With care, you can also use a refrigerator condenser coil brush to gently remove the debris from the coils.
4. Clear debris from outside of the condensing unit.
Trim or clear shrubs and tree branches so that there is at least two feet of clear space around the unit. This space will ensure that there is enough air flow and that there’s enough space for the condenser fan to operate properly. Tweet this tip.
5. Check the ductwork.
Take a cruise around your home and inspect the registers. Make sure that there is nothing obstructing air flow. You may be surprised to find a rug or piece of furniture blocking some or all of the air flow.
Open the registers and check for any fallen objects, especially if you have small children. Children are known to drop small toys into floor registers. If you suspect a mold problem within your ducts, consider hiring a company that specializes in cleaning ventilation systems. Tweet this tip
You might also consider checking the ductwork in your attic or basement. The connections and seams should be sealed tightly so that no cold air escapes and the ductwork should all be well insulated.
After you’ve completed those steps, power the system on at the circuit breaker and thermostat and complete the following:
6. Test system controls.
Run the starting cycle to ensure its safe operation and that it powers off properly.
7. Check your thermostat.
Make sure that your thermostat is set to the appropriate temperature for your family’s needs.
8. Consider installing a programmable thermostat.
A programmable thermostat reduces energy waste by ensuring that your home is cooled to a set temperature when you’re home and when you are away. Tweet this tip.
According to the U.S. Environmental Protection Agency, a programmable thermostat can save you about 180 dollars in energy costs every year.
RepairClinic.com has replacement parts for central air conditioners, window air conditioners and through-the-wall air conditioners.
Love DIY tips and discounts? We do, too. That’s why we give them away.
Have you joined our free VIP email list?
Need help finding the right part?
We’re here for you 7 a.m. to midnight ET, every day.
Call us at 1-800-269-2609 or chat with us live on RepairClinic.com.
Since 1999, three and a half million people have purchased replacements parts and accessories from RepairClinic and saved more than $260 million in repair costs by fixing appliances, lawn equipment, power tools, and heating & cooling equipment on their own. From the beginning, RepairClinic has provided free troubleshooting and how-to resources on its website.
The company’s 2,000+ free how-to repair and how-it-works videos on its YouTube channel have been viewed more than 41 million times.
RepairClinic’s free, advanced online repair help system empowers do-it-yourselfers to fix common problems associated with home appliances, lawn equipment, power tools and heating & cooling equipment. DIYers can enter a model number to choose from a list of common symptoms for that particular model, troubleshoot and watch award-winning, expertly-produced videos to learn the most likely causes and conditions and purchase the correct part.
RepairClinic.com stocks more than one million parts and accessories for 160 brands of lawn mowers, small engines, snowblowers, string trimmers, furnaces, air conditioners, air handlers, heat pumps, washing machines, dryers, dishwashers, vacuum cleaners, power tools and many other products.
Since 1999, the company has served more than three million customers including homeowners, first-time and beginner DIYers, advanced DIYers, appliance repair professionals, small engine repair shops and landscaping and lawn care business owners. RepairClinic orders are backed by a 365 Days. Period.® return policy that enables customers to return any part. Of the more than one million parts available on the website, 95 percent of parts ordered are in stock and guaranteed to ship the same business day. RepairClinic ships within the United States, U.S. territories and military bases and Canada.